KZ1000R.com Bike of the Month March 09.

BOM march 09

Owner: Mark Ponsford (pigford) KZ1000r from the z1ownersclub in the UK.

I got my ELR in September 2008.

It is NOT standard and has a bit of history. Back in 1989 a couple of well known bike shops did some work on it....
Steve Bateman (Bournemouth UK) & Debben Performance (still going strong today)

had the cases milled out and 1260cc liners fitted
The 1989 spec:
1260 Wiseco kit. Megacycle .410 cams. Under bucket shims.

Gas flowed head. s/s valves. APE billet cam chain adjuster.

V&H end pipe & s/s headers. Fournale air shox. JMC s/arm. 1-off CMA wheels. Mikuni RFS38's. K&N's..... etc.

BOM march 09

When I collected the bike & got it home..... Things weren't quite what they seemed

The bike was a poor starter (took a good minute) but didn't smoke. After a week of fiddling about with the carbs (which turned out to be only RFS34's) I decided to do a compression test. Only 100 psi # 1, 2 & 3 and 80psi # 4.

So its engine strip down time

Top end is as spec & valves looked OK so just lapped them in & fitted new stem seals & APE h/d springs.


BOM march 09

Barrels & pistons... Only 1075cc! RE BORE time.
Got some 75mm Wiseco hi-comp pistons & re bored barrels. Engine out & full strip.
Got cases grit blasted... paints with PJ1 satin & rebuilt with new seals & 'O' rings etc.
New cam chain... h/d barrel studs.....

BOM march 09

Engine back in......... time to re-assemble top end...

BOM march 09

Just got a bit more engine stuff to whack back together....... Roll on summer

BOM march 09

BOM march 09

another great bike, i thought white would make a nice change and mark's bike is very clean example.

congratulations pigford ole buddy break out the tea and biscuits.

kano.

More pics in the gallery of Pigford's Bike of the month March 09.

 

We will be featuring a different bike each month on kz1000r.com

that we feel is deserving of the title "Bike of The Month."

Check back often to see what our pick is.

To nominate or submit your own bike for "Bike of The Month."
Send some info on yourself your bike and loads of pic's bigger the better.

PLEASE SEND IN YOUR INFO IF YOU ARE LUCKY ENOUGH TO OWN ONE OF THESE BIKES!

I really want to bring THIS Registry up to date so accurate number's left in circulation can be made available,

this will intern help us get a true market value for insurance purposes.

Please include the chassis number and the month of production printed on the headstock of your bike.

Your name and location. and most importantly a picture's of your bike.


E-mail me at: This email address is being protected from spambots. You need JavaScript enabled to view it.

Kano.

Login Form